EN10025 S355N|S355NL|S460N|S460NL--YUSHENG IRON AND STEEL CO.,LIMITED

Accreditation Administration System:

Home-Technology
Technology
EN 10025 S355NL

S355NL is mainly intended for constructure, construction machinery and equipment in specification EN10025-3.These plates shall be under Normalized or Normalized rolled delivery condition.The relative steel grade are S275N,S275NL,S355N,S355NL,S420N,S420NL,S460N,S460NL.

Besides Normalized Heat treatment,Low temperature impacting test is also the necessary technical items in rolling.The verification of impacting temperature shall be carried out as belows: S…N shall be at -20℃

S…NLshall be at -50℃

Else, for the Ladle Analysis and tensile test shall be conform as to the following table.

Property Data:(Ladle Analysis)

EN10025-3
Grade			S355N	S355NL	S460N	P460NL
Chemical Composition % ≤	C		0.20	0.18	0.20
	Si		0.50		0.60
	Mn		0.90-1.65		1.00-1.70
	P		0.030	0.025	0.030	0.025
	S		0.025	0.020	0.025	0.020
	Nb		0.05
	V		0.12		0.20
	Al total		≥0.02
	Ti		0.05
	Cr		0.30
	Ni		0.50		0.80
	Mo		0.10
	Cu		0.55
	N		0.015		0.025
Mechanical Property ≥	Yield (Mpa)	t≤16	355		460
		16﹤t≤40	345		440
		40﹤t≤63	335		430
		63﹤t≤80	325		410
		80﹤t≤100	315		400
		100﹤t≤150	295		380
		150﹤t≤200	285		370
		200﹤t≤250	275
	Tensile (Mpa)	t≤100	470-630		540-720
		100﹤t≤200	450-600		530-710
		200﹤t≤250